FF-8070 Board Outline

Description

• The FF-8070 directly interfaces with the FF-800 repeater controller and accepts command data via the FF-800 SPI expansion port.
• Includes eight 1 mega-bit DRAMS for a total record time of 168 seconds. (expandable to 32 mega-bits for over 10 minutes of total record time).
• Up to 100 system tracks for recording function annunciators, voice IDs, bullitens, etc...
• Allows user defined track sizes. This fixed track length architecture gives the user the capability to re-record tracks without being limited by the original track length (the only limit is the allocated length).
• Voice mail box system with DVR track prompts for user friendly operation. The voice mailbox can support up to 32 messages of up to 20 seconds each (the number of available mailbox tracks is limited by the ammount of installed DRAM).
• User defined control codes for mail box commands. Allows the FF-8070 to have similar command formats as other DVRs -- especially useful for groups with multiple repeaters.
• Audio test feature -- automatically repeats recorded audio to allow users to gauge their audio quality.
• Security feature to prevent tampering.
• Programmable track interrupt mode. Three modes allow play tracks to be interrupted by COS, any DTMF, or no interrupt allowed.
• Record and playback from radio or phone (via FF-800 control autopatch).

FF-8070A Board Outline

Description

• Includes eight 1 mega-bit DRAMS for a total record time of 168 seconds. (expandable to 32 mega-bits for over 10 minutes of total record time).
• Up to 100 system tracks for recording function annunciators, voice IDs, bullitens, etc...
• Allows user defined track sizes. This fixed track length architecture gives the user the capability to re-record tracks without being limited by the original track length (the only limit is the allocated length).
• Voice mail box system with DVR track prompts for user friendly operation. The voice mailbox can support up to 32 messages of up to 20 seconds each (the number of available mailbox tracks is limited by the ammount of installed DRAM).
• User defined control codes for mail box commands. Allows the FF-8070 to have similar command formats as other DVRs -- especially useful for groups with multiple repeaters.
• Audio test feature -- automatically repeats recorded audio to allow users to gauge their audio quality.
• Programmable track interrupt mode. Three modes allow play tracks to be interrupted by COS, any DTMF, or no interrupt allowed.
• Serial data input can also be used to input commands in DTMF format.
• Programmable CW telemetry to allow various configuration parameters to be interrogated.